EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Series Solar Charge Controller is usually a very successful photo voltaic controller suitable for off-grid solar methods. Based upon multiphase synchronous rectification technologies, it guarantees optimized Vitality conversion and system balance for a wide array of photovoltaic (PV) apps.
Important Characteristics with the EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Cost Controller know-how for top-quality photo voltaic Electrical power harvesting. Vital options include:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Advanced MPPT Algorithm with >99% performance.
Dual-Stage Charging for enhanced battery lifestyle.
Liquid crystal display Exhibit with authentic-time facts checking.
A number of Load Management Modes like guide and timer.
Extensive Electronic Protections towards overcharging, more than-discharging, brief circuits, and reverse polarity.
Step-by-Move Guideline to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Making ready the Controller
Be certain all factors are bundled: Tracer AN device, temperature sensor, interaction cables, and person handbook.
Confirm the model variety and voltage ratings match your solar panel and battery specifications.
two. Mounting the Cost Controller
Decide on a properly-ventilated, dry area close to the battery bank.
Safe the Tracer AN controller utilizing the presented mounting brackets.
Sustain correct clearance for heat dissipation.
three. Wiring the Solar Charge Controller
Warning: Generally follow appropriate basic safety protocols and make sure the process is run off before connecting factors.
Phase 1: Join the battery terminals on the demand controller (constructive to positive, negative to negative).
Phase two: Hook up the photo voltaic panel array for the PV input terminals.
Stage 3: Link the load terminals if using a immediate load link.
Step four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electricity around the controller by connecting the battery to start with.
Use the Liquid crystal display Exhibit to navigate the settings menu.
Configure:
Battery Style: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Manual, timer, light-weight Management.
5. Checking and Information Logging
The Tracer AN Collection supports true-time monitoring utilizing the MT50 remote meter.
Facts could be logged via the RS485 conversation port utilizing software for instance Solar Station Laptop.
Remote checking is achievable With all the EPEVER WiFi module.
six. Troubleshooting Frequent Issues
Issue one: No Electrical power Output
Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue 2: Around-Voltage Safety
Validate the solar array’s voltage ranking.
Adjust process parameters if essential.
Challenge 3: visit here No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT settings while in the menu.
Benefits of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological innovation makes sure:
Larger Performance: Decreased Electricity losses in the course of conversion.
Increased Reliability: Steady general performance beneath variable hundreds.
Lengthier Battery Daily life: Dependable and correct charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation can be an Excellent option for optimizing solar energy generation and lengthening battery everyday living. By subsequent the above mentioned set up guide, consumers can assure maximum efficiency and process longevity.